Carbon nanotube-based multiple source C-arm CT system: feasibility study with prototype system

Abstract

To extend the field of view while reducing dimensions of the C-arm, we propose a carbon nanotube (CNT)-based C-arm computed tomography (CT) system with multiple X-ray sources. A prototype system was developed using three CNT X-ray sources, enabling a feasibility study. Geometry calibration and image reconstruction were performed to improve the quality of image acquisition. However, the geometry of the prototype system led to projection truncation for each source and an overlap region of object area covered by each source in the two-dimensional Radon space, necessitating specific corrective measures. We addressed these problems by implementing truncation correction and applying weighting techniques to the overlap region during the image reconstruction phase. Furthermore, to enable image reconstruction with a scan angle less than 360°, we designed a weighting function to solve data redundancy caused by the short scan angle. The accuracy of the geometry calibration method was evaluated via computer simulations. We also quantified the improvements in reconstructed image quality using mean-squared error and structural similarity. Moreover, detector lag correction was applied to address the afterglow observed in the experimental data obtained from the prototype system. Our evaluation of image quality involved comparing reconstructed images obtained with and without incorporating the geometry calibration results and images with and without lag correction. The outcomes of our simulation study and experimental investigation demonstrated the efficacy of our proposed geometry calibration, image reconstruction method, and lag correction in reducing image artifacts.