Optoelectronic optimization of graded-bandgap thin-film AlGaAs solar cells. Part II: optimal antireflection front-surface texturing

Abstract

In Part I [Appl. Opt. 59, 1018 (2020).APOPAI0003-693510.1364/AO.381246], we used a coupled optoelectronic model to optimize a thin-film AlGaAs solar cell with a graded-bandgap photon-absorbing layer and a periodically corrugated Ag backreflector combined with localized ohmic Pd–Ge–Au backcontacts, because both strategies help to improve the performance of AlGaAs solar cells. However, the results in Part I were affected by a normalization error, which came to light when we replaced the hybridizable discontinuous Galerkin scheme for electrical computation by the faster finite-difference scheme. Therefore, we re-optimized the solar cells containing an n-AlGaAs photon-absorbing layer with either a (i) homogeneous, (ii) linearly graded, or (iii) nonlinearly graded bandgap. Another way to improve the power conversion efficiency is by using a surface antireflection texturing on the wavelength scale, so we also optimized four different types of 1D periodic surface texturing: (i) rectangular, (ii) convex hemi-elliptical, (iii) triangular, and (iv) concave hemi-elliptical. Our new results show that the optimal nonlinear bandgap grading enhances the efficiency by as much as 3.31% when the n-AlGaAs layer is 400 nm thick and 1.14% when that layer is 2000 nm thick. A hundredfold concentration of sunlight can enhance the efficiency by a factor of 11.6%. Periodic texturing of the front surface on the scale of 0.5–2 free-space wavelengths provides a small relative enhancement in efficiency over the AlGaAs solar cells with a planar front surface; however, the enhancement is lower when the n-AlGaAs layer is thicker.