Thermorefractive noise reduction of photonic molecule frequency combs using an all-optical servo loop

Abstract

Phase and frequency noise originating from thermal fluctuations is commonly a limiting factor in integrated photonic cavities. To reduce this noise, one may drive a secondary “servo/cooling” laser into the blue side of a cavity resonance. Temperature fluctuations which shift the resonance will then change the amount of servo/cooling laser power absorbed by the device as the laser moves relatively out of or into the resonance, and thereby effectively compensate for the fluctuation. In this paper, we use a low noise laser to demonstrate this principle for the first time in a frequency comb generated from a normal dispersion photonic molecule micro-resonator. Significantly, this configuration can be used with the servo/cooling laser power above the usual nonlinearity threshold since resonances with normal dispersion are available. We report a 50 % reduction in frequency noise of the comb lines in the frequency range of 10 kHz to 1 MHz and investigate the effect of the secondary servo/cooling noise on the comb.