Optical design mode based on fast automatic design process for freeform reflective imaging systems with modest FOV

Abstract

Traditional optical design methods require designer intervention in the system’s evolution from the starting point to the final design. Trial-and-error during design optimization improves system performance step by step but requires much time and effort. A new optical design framework, end-to-end fast automatic design, is proposed and achieved for the freeform reflective optics in this paper, which promotes a new optical design mode. Compared with the traditional mode through improving performance after each trial, an optical system with good image quality can be directly obtained in the end-to-end design process with simple input and no human involvement within a short time. If there is still the possibility for performance improvement of the obtained system, the designer can vary the input parameters repeatedly to obtain multiple systems with good image quality. Finally, the desired system is selected from these systems. Compared with the step-by-step trials in traditional optimization, this new optical design mode involves high-speed trials of the end-to-end automatic design process, reducing the dependence on experience and skill. In this paper, an end-to-end fast automatic design method for freeform imaging systems is developed based on a new design route. Using an initial plane system as an input, a freeform system with excellent image quality can be designed automatically within 1–2 min. After several trials of the end-to-end fast design process, three high-performance freeform systems are designed successfully that consider volume control, beam obscuration, and mirror interference.