Design and dynamic characterization of a phototunable optofluidic lens

Abstract

Optofluidic devices that dynamically respond to light stimuli have the potential to impart modern adaptive optics with intrinsic optical logic without the need for external power sources or feedback control. While photo actuation is typically associated with low energy efficiency compared with alternative modes of actuation, fluid lenses can be tuned with minimal work by generating small differential pressures across the surface of the lens to drive a change in focal length. In this study, we developed a wide aperture (9.5 mm) photothermally actuated lens that leverages spatially and thermodynamically informed design principles developed for resistively heated thermo-pneumatically actuated lenses. Using experimentally validated models to describe the curvature of pressurized elastomer-bound interfaces, we demonstrated phototunable modulation of the focal length from 124 mm to 90 mm in real time using 233 mW of 405 nm light over 30 s of irradiation with an estimated 8.2 µJ of mechanical work (10−4% efficiency). The initial focal length recovered after 60 s in the dark over three consecutive cycles of actuation. Additionally, the photoactuated response is shown to correlate well with the light intensity.