Broadband SnS/Te photodetector to long-wavelength infrared: breaking the spectrum limit through alloy engineering

Abstract

Materials based on group IV chalcogenides, are considered to be one of the most promising materials for high-performance, broadband photodetectors due to their wide bandgap coverage, intriguing chemical bonding and excellent physical properties. However, the reported photodetectors based on SnS are still worked at relatively narrow near-infrared band (as far as 1550 nm) hampered by the nonnegligible bandgap of 1.1-1.5 eV. Here, a novel photodetector based on Te alloyed SnS thin film was demonstrated with an ultra-broadband response up to 10.6 µm. By controlling the Te alloyed concentration in SnS increasing to 37.64%, the bandgap narrows to 0.23 eV, exhibiting a photoresponse potential at long-wavelength infrared excitation. Our results show Te-alloying can remarkably enhance the detection properties of SnS/Te photodetectors. The photoresponsivity and detectivity of 1.59 mA/W and 2.3 × 108 Jones were realized at 10.6 µm at room temperature. Moreover, the nonzero photogain was observed generated by nonlinearly increased photocurrent density, resulting in a superlinear dependency between photoresponsivity and light intensity. Our studies successfully broaden photoresponse spectrum of SnS toward the mid-infrared range for the first time. It also suggests that alloying is an effective technique for tuning the band edges of group IV chalcogenides, contributing deep implications for developing future optoelectronic applications.