Influence of a longitudinal-mode on stimulated Brillouin scattering characteristics in fused silica

Abstract

Analyzing the longitudinal-mode of a pump can significantly prevent optical damage to solid media and expand the applications of solid media in high repetition rate stimulated Brillouin scattering (SBS). In this study, a Fabry-Pérot etalon was used to control the number of longitudinal-mode in a pump laser output. We studied the output characteristics of SBS in fused silica by considering both single- and multi-longitudinal-mode pumping. We analyzed and compared variations in the SBS threshold, energy reflectivity, linewidth, and waveform characteristics. The experimental results indicated that a pump operating in a single-longitudinal-mode had a 14% lower SBS threshold than one operating in a multi-longitudinal-mode. The proportion of the weak longitudinal-mode in the multi-longitudinal-mode was close to the threshold difference. The damage threshold of the multi-longitudinal-mode pumps was approximately 35 mJ (@12 ns, f = 300 mm). The Stokes linewidth and waveform exhibited opposite trends as the energy changed. Due to the time-bandwidth product, the linewidth and waveform tended to converge towards the pump. This study emphasizes the importance of using a single-longitudinal-mode pump in the development and use of solid-state SBS gain media.