Broadband photonic beam processor for simultaneous beamforming and high-resolution imaging

Abstract

In this paper, a broadband photonic beam processor is presented for the all-optical multifunction integrated receiver. By implementing echo signals with optical beam multi-domain processing based on space-to-time mapping and time-to-frequency mapping, the non-mechanical control of expected beam pointing is enabled while the target within the beam can be imaged simultaneously. A proof-of-concept experiment with a 4-element phased array is performed in Ka band. The beam pointing is set to be 0° and 12.5°, where two-dimensional images of moving targets inside the beam region are obtained, respectively. The suppression ratio to the beam region outside is measured to be 26.8 dB. And the range and cross-range imaging resolution is 0.042 m × 0.051 m. A comparison with a cascade mode of single-function microwave photonic modules shows that the multifunction integrated photonic beam processor has reduced the system loss by 32.4 dB. The proposed beam processor enables multi-element broadband phased arrays with less complexity and power consumption.