Affiliation:
1. University of Science and Technology of China
2. State Key Laboratory of Pulsed Power Laser Technology
Abstract
For a coaxial single-photon lidar system, amplified spontaneous emission (ASE) noise from the fiber amplifier is inevitable. The ASE backscattering from specular reflection annihilates the far-field weak signal, resulting in low signal-to-noise ratio, short measurement distance, and even misidentification. We propose a method for calibrating and mitigating ASE noise in all-fiber coaxial aerosol lidar and demonstrate the method for a lidar system with different single-photon detectors (SPDs). The accuracy of the coaxial aerosol lidar is comparable to that of the biaxial one. We conducted an experiment using three different detectors, namely, InGaAs/InP SPD, up-conversion SPD, and superconducting nanowire SPD in the same coaxial lidar system. Compared with the biaxial system, the three different detectors we used have achieved more than 90% ASE noise suppression, the measured visibility percent errors of InGaAs/InP SPD data, up-conversion SPD data, and superconducting nanowire SPD data all within 20%, and the percent error within 10% are 99.47%, 100%, and 95.12%, respectively. Moreover, time-sharing optical switching allowed to obtain background noise with high accuracy.
Funder
State Key Laboratory of Pulsed Power Laser Technology
National Natural Science Foundation of China
Key-Area Research and Development Program of Guangdong Province
Shanghai Municipal Science and Technology Major Project
Joint Open Fund of Mengcheng National Geophysical Observatory
Fundamental Research Funds for the Central Universities
Subject
Atomic and Molecular Physics, and Optics