Design and fabrication of a coupled high-Q photonic nanocavity system with large coupling coefficients

Abstract

In a previous work, we demonstrated a coupled cavity system where photons in one storage cavity can be transferred to another storage cavity at an arbitrary time by applying a voltage pulse to a third cavity placed in a p-i-n junction. In this work, we demonstrate methods to improve the transfer efficiency and photon lifetimes of such a coupled system. Firstly, we designed a photonic-crystal structure that achieves a large coupling coefficient without reducing the radiation quality factor compared to the previously proposed structure: The photonic-crystal design was changed to a more symmetric configuration to suppress radiation losses and then optimized using an automatic structure tuning method based on the Covariance Matrix Adaptive Evolutional Strategy (CMAES). Here we added two improvements to achieve an evolution toward the desired direction in the two-dimensional target parameter space (spanned by the coupling coefficient and the inverse radiation loss). Secondly, to improve the experimental cavity quality factors, we developed a fabrication process that reduces the surface contamination associated with the fabrication of the p-i-n junction: We covered the photonic structure with a SiO2 mask to avoid the contamination and the electrode material was changed from Al to Au/Cr to enable cleaning by a weak acid. Owing to these improvements of the cavity design and the fabrication process, the obtained system provides coupling strengths that are about three times stronger and photon lifetimes that are about two times longer, compared to the previously reported system.