Uniform all-solid chalcogenide Bragg fiber with wide photonic bandgap via extrusion

Abstract

As the Bragg fiber can guide light by tuning the structure parameters of claddings, it is possible to improve the ability of laser-power transmission in the mid-infrared with effective omnidirectional reflection, but it usually suffers from the disturbance of the air core and functional bandgap. Here, the structural parameters of three pairs of periodic cladding layers were optimized by the plane wave expansion method, and the thickness of each layer is 3.36 µm, consisting of Ge20As20Se15Te45 and As2S3 glasses with a refractive index contrast of Δn = 0.8. The simulation results showed that a wide bandgap of 1.2 µm can be realized in the fiber after structural optimization. Then, a fiber preform was prepared via an improved stacked extrusion based on seven thickness-compensated glass plates. The experimental results show that the all-solid Bragg fiber has three pairs of uniform periodic cladding and an extra-large core. The superior optical fiber structure can also be well maintained in the whole fiber length, and the average ratio of each cladding thickness to the fiber diameter is kept nearly at 3:100. Finally, the fiber loss at 1.55 µm and 2.94 µm is 12 dB/m and 18 dB/m, respectively. In all, such a well-structured all-solid chalcogenide Bragg fiber would pave a new way to develop high-quality laser transmission or optical sensors in mid-infrared.