Freestanding narrowband terahertz filters based on aluminum foil

Abstract

Terahertz (THz) filters with high transmission coefficient (T) in the passband and frequency selectivity are critical in numerous applications such as astronomical detection and next-generation wireless communication. Freestanding bandpass filters eliminate the Fabry–Pérot effect of substrate, thus providing a promising choice for cascaded THz metasurfaces. However, the freestanding bandpass filters (BPFs) using the traditional fabrication process are costly and fragile. Here, we demonstrate a methodology to fabricate THz BPFs using aluminum (Al) foils. We designed a series of filters with center frequencies below 2 THz and manufacture them on 2-inch Al foils with various thicknesses. By optimizing the geometry, T of the filter at the center frequency is over 92%, and the relative full-width half maxima (FWHM) is as narrow as 9%. The responses of BPFs show that “cross-shaped” structures are insensitive to the polarization direction. The simple and low-cost fabrication process of the freestanding BPFs promise their widespread applications in THz systems.