Abstract
The laser-induced damage of ultraviolet fused silica optics is a critical factor that limits the performance enhancement of high-power laser facility. Currently, wet etching technology based on hydrofluoric acid (HF) can effectively eliminate absorbing impurities and subsurface defects, thereby significantly enhancing the damage resistance of fused silica optics. However, with an increase in the operating fluence, the redeposition defects generated during wet etching gradually become the primary bottleneck that restricts its performance improvement. The composition and morphology of redeposition defects were initially identified in this study, followed by an elucidation of their formation mechanism. A mitigation strategy was then proposed, which combines a reduction in the generation of precipitation with an acceleration of the precipitation dissolution process. Additionally, we systematically investigated the influence of various process parameters such as extrinsic impurity, etching depth, and megasonic excitation on the mitigation of deposition defects. Furthermore, a novel multiple-step dynamic etching method was developed. Through comprehensive characterization techniques, it has been confirmed that this new etching process not only effectively mitigate redeposition defects under low fluence conditions but also exhibits significant inhibition effects on high fluence precursors. Consequently, it significantly enhances the laser damage resistance performance of fused silica optics.