Author:
Danyleiko Oleksandr,Dzhemelinskyi Vitaliy,Lesyk Dmytro,Bernatskyi Artemii
Abstract
The article discusses the prospects of using combined thermal deformation surface processing to improve the performance properties of metal products. There is a new method of thermal deformation surface hardening (shot peening (SP) followed by laser heat treatment (LHT)) for tools and crown housings operating under difficult conditions proposed. For carrying out experimental studies, flat samples of 30KhGSA steel and steel 45 were selected. Preliminary hardening and finishing with static or dynamic methods of surface plastic deformation were carried out on a modernized installation based on a DYNAMITE 2800 numerical control machine, and SP was implemented on industrial equipment. Laser surface hardening of the samples was carried out in single passes with a sample moving speed of 300...500 mm/min with a laser beam diameter of 7.3 mm and a laser power of 1 kW using the ROFIN-SINAR DY 044 technological unit. The optimal regimes of surface hardening are determined under the deformation action of a gas-dynamic flow with solid particles and thermal action by a laser beam to obtain maximum values of hardening depth and hardness. In particular, with SP, the gas-feed stream feed pressure is 0.5 MPa, the processing time is 1 min, regardless of the type of material. The optimal laser beam power is 1 kW at a sample travel speed of 300 mm/min. There are the results of experimental studies of the change in the hardening depth as a function of time and pressure after SP, the speed of movement of the treated sample from carbon steel 45 and medium alloyed steel 30KhGSA after LHT and combined SP+LHT, and also the distribution of microhardness over the depth of the hardened layer presented. It is revealed that the combined SP+LHT of 30 KhGSA steel at optimal modes forms 1.5 times (1.3 mm) greater depth of the strengthened surface layer in comparison with LHT, while providing the surface layer hardness of ~5400 MPa.
Publisher
Vinnytsia National Agrarian University
Reference14 articles.
1. 1. Krivtsun, I.V. (2009). Gibridnye lazerno-plazmennye protsessy svarki i obrabotki materialov [Hybrid laser-plasma welding and material processing processes]. Mykolajiv: Gheljvetyka [in Russian].
2. 2. Lesyk, D.A., Martinez, S., Dzhemelinskyi, V.V., Lamikiz, A., Mordyuk, B.N., Prokopenko, G.I. (2015). Surface microrelief and hardness of laser hardened and ultrasonically peened AISI D2 tool steel. Netherlands: Elsevier Science Publishing Company. (Vol. 278), (pp. 108-120).
3. 3. Gholovko, L.F. (2009). Lazerni tekhnologhiji ta komp'juterne modeljuvannja [Laser technologies and computer simulation]. L.F. Gholovko, S.O. Luk'janenko (Ed.). Kyjiv: Vistka [in Ukrainian].
4. 4. Khlynyn, P.P. (2003). Sovershenstvovanye konstruktyvno rezhymnykh parametrov drobylky molotkovoho typa [Improving the structurally operational parameters of the hammer type crusher]. Extended abstract of candidate’s thesis. Orenburh [in Russian].
5. 5. Lesyk, D.A., Martinez, S., Dzhemelinskyi, V.V., Dаnylеikо, O.O., Mordyuk, B.N. (2018). Combined laser-ultrasonic surface hardening process for improving the properties of metallic products. Advances in Design, Simulation and Manufacturing: Proceedings of the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2018. (рр. 97‑107). Sumy: Springer, Cham.