Affiliation:
1. Farm Design
2. Alliance-Auto Truck
3. Peter the Great St. Petersburg Polytechnic University (SPbPU)
Abstract
Introduction. An on-site inspection method is a visual examination of an engineering structure aimed at the detection of defects, damages, and disturbances of a construction facility and further issuance of recommendations for their elimination. An on-site inspection method is among the principal ones applied, as it serves to identify all defects of bridge structures during their service lives.
Materials and methods. The structures of the bridge over the Kosopasha river, located at the 5+910 km of the Pasha – Sviritsa – Zagubye motor road, the Volkhov District, Leningrad Region, were inspected. An on-site inspection method was applied to collect the information and perform the preliminary analysis.
Results. The co-authors described the construction of the bridge elements, including the road deck topping, expansion joints, the safety parapet, sidewalks, hand rails, water insulation, the drain line, the bridge approach, the span, bridge support structures, piers, the bridge abutment, and the under-bridge area. They analyzed the condition of these elements at the time of their inspection; they compiled a report on defects, damages and the bridge deck capacity. The main defects include concrete leaching accompanied by concrete reinforcement denuding, concrete cracking and chipping, absence of safety parapet, partial destruction of rails, and failure of abutment strengthening constructions.
Conclusions. Recommendations for the further operation of the bridge were formulated on the basis of inspection results. A set of measures is proposed with the purpose of eliminating the defects and further safe operation of the bridge structure. The recommendations include a set of repair works in respect of particular joints and constructions: removal of dust and dirt from the elements of the bridge topping and sidewalks, repair of minor damages of reinforced concrete structures, shore protection aimed at abutment reconstruction, installation of the safety parapet.
Publisher
Moscow State University of Civil Engineering
Reference20 articles.
1. Bokarev S.A., Soloviev L.Yu., Tsvetkov D.N., Rogova E.V. The results of a full-scale examination and testing of steel-reinforced concrete spans of railway bridges in Siberia and the Far East. Tomsk State University of Architecture and Civil Engineering. 2009; 160-170. (rus.).
2. Bilchenko A.V., Berezhnaya E.V., Krasnov S.N. The operational condition of thebridges of the Kharkov region based on survey data. Bulletin of the Kharkov National Automobile and Highway University. 2006; 63-65. (rus.).
3. Smerdov D.N. Field investigations of concrete spans of highway bridges reinforced by composite materials. Actual problems of road design. Collection of scientific papers of JSC Giprodorniya. 2012; 3:27-33. (rus.).
4. Skorobogatov S.M. Accelerated inspection of massive and long railway structures and structures. Transport of the Urals. 2004; 1:60-69. (rus.).
5. Mahamid M., Ozevin D., Torra-Bilal I.,Kabir M., Mastny S., Khudeira S. et al. Structural Design and Inspectability of Highway Bridges. Practice Periodical on Structural Design and Construction. 2019; 24(3):06019002. DOI: 10.1061/(asce)sc.1943-5576.0000425
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献