Reliability analysis of compressed timber studs on the buckling criterion

Abstract

Introduction. Ensuring safety is a priority goal in the design, construction and operation of building and structures. A quantitative assessment of safety can be the failure probability of a structural element. The article presents algorithms for reliability analysis of timber studs by the buckling criterion under central compression force. Materials and methods. The FOSM (First Order Second Moment) method is a classic approach for solving many reliability analyses tasks in the engineering sector. This method uses the second statistical moments of random variables (mathematical expectation and variance) and the method of statistical linearization with the decomposition of the function into a Taylor series of the first order. However, it is often necessary to deal with nonlinear limit state functions, where the statistical linearization method can lead to incorrect results. In this case, it is necessary to use other algorithms for reliability analysis: the Hasofer – Lind method, SORM (Second Order Reliability Method), etc. Results. The numerical example of reliability analysis for compressed timber studs on the buckling criterion is considered. To illustrate the problem of the research, the dimensions of the cross-section of the studs and the strength of the wood are taken as random variables, and the load is considered a deterministic value. In the following, an algorithm for reliability analysis is described for a timber studs under random load. The classical FOSM approach showed an overestimated reliability index by 35 % compared to the results of the Monte Carlo numerical experiment and the analytical solution using the Hasofer – Lind algorithm. Conclusions. The use of the traditional FOSM method for reliability analysis of wooden studs according to the buckling criterion can lead to overestimated reliability index estimates. It is unacceptable from the point of view of the structural safety. The calculation and analysis of the reliability of timber studs should be carried out on the basis of the Hasofer – Lind algorithm, the SORM method or other optimization methods.