Calculation features of wall panels with monolithic cement bond of layers in the stages of installation, transportation and maintenance

Abstract

Introduction. When building residential, public and administrative buildings of various spatial structural designs (monolithic, precast-monolithic, precast, etc.), it is common practice to design self-sustaining (non-structural) outer walls within a storey. Developing and using new design and fabrication solutions of multilayer industrial-made wall panels in modern construction practice makes actual the issue of improving methods of their calculation in different stages of maintenance and under various sorts and combinations of loads and effects. However, there is an infinite variety of possible loading levels in practice and, therefore, the same variety of design approaches would be required. This is obviously unacceptable for engineering calculations, hence it is necessary to provide a monolithic matrix bond of layers, both technologically and structurally, which can provide a generalized approach to the calculation of multilayer enclosing structures in accordance with current design standards. Materials and methods. The article describes structural features of a multilayer wall panel made of structural concrete with the middle layer of concrete with low thermal conductivity and monolithic bond of layers. These features have an influence on creation of a design model and a calculation procedure in the stages of transportation, installation and maintenance. Results. The article has examined the structures described above in the sense of design parameters that provide their competitive advantages in strength and maintenance as compared with conventional mass-built enclosures. Conclusions. The studies demonstrate that when combining loads of force and non-force character, stresses in the considered structure do not exceed allowable values in all the stages what proves the prospects of using the multilayer panels with monolithic bond of layers for erection of various-purpose frame-panel buildings.