Optimization mechanism of bonding strength of laser melting deposited tungsten/reduced activation steel heterogeneous interface via addition of Y2O3 by magnetron sputtering-Reference-Cited by-同舟云学术

Optimization mechanism of bonding strength of laser melting deposited tungsten/reduced activation steel heterogeneous interface via addition of Y2O3 by magnetron sputtering

Published:2020-08 Issue: Volume:157 Page:111646
ISSN:0920-3796
Container-title:Fusion Engineering and Design
language:en
Short-container-title:Fusion Engineering and Design

Author:

Jiang Wenjuan,Xia Zhixin,Xu Jiachao,Zhao Dong,Xia Shaoqiu,Wang Liang

Funder

National Key R&D Program of China

National Natural Science Foundation of China

China Postdoctoral Science Foundation

Publisher

Elsevier BV

Subject

Mechanical Engineering,General Materials Science,Nuclear Energy and Engineering,Civil and Structural Engineering

Reference28 articles.

1. Cracking behaviour of PVD tungsten coatings deposited on steel substrates;Ganne;Acta Mater.,2002

2. Review on diffusion bonding between tungsten and Steel;Dai;J. Ordnance Eqpt. Eng.,2019

3. Effect of TaC particles dissolution on grain coarsening in reduced activation steels;Xia;J. Iron Steel Res. Int.,2011

4. Helium-cooled divertor for DEMO: manufacture and high heat flux tests of tungsten-based mock-ups;Norajitra;J. Nucl. Mater.,2009

5. Progress in the engineering design and assessment of the European DEMO first wall and divertor plasma facing components;Barrett;Fusion Eng. Des.,2016

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Study on strengthening and toughening of W_f/W composites by designing the ratio of raw W_f and coated W_f;Materials Science and Technology;2024-08-23

2. Microstructure formation mechanism and corrosion behavior of FeCrCuTiV two-phase high entropy alloy prepared by different processes;Fusion Engineering and Design;2021-11

3. Laser melting deposited self-passivating 90W-10Cr coatings on reduced activation ferritic/martensitic steel using 90W-7Ni-3Fe interlayers;Journal of Nuclear Materials;2021-09

4. Enhanced thermal stability of the cellular structure through nano-scale oxide precipitation in 3D printed 316L stainless steel;Fusion Engineering and Design;2021-03

5. Effect of thermal cycles on microstructure of reduced activation steel fabricated using laser melting deposition;Journal of Iron and Steel Research International;2020-06-24