Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si

Insight into solidification microstructure control by trace TiCN–TiB2 particles for yielding fine-tuned nanoprecipitates in a hypoeutectic Al–Si–Mg alloy

Published:2021-10 Issue: Volume:827 Page:142093
ISSN:0921-5093
Container-title:Materials Science and Engineering: A
language:en
Short-container-title:Materials Science and Engineering: A

Author:

Li Qiang,Dong Bai-Xin,Liu Tian-Shu,Yang Hong-Yu,Shu Shi-Li,Qiu Feng^ORCID,Jiang Qi-Chuan

Funder

National Natural Science Foundation of China

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Reference80 articles.

1. Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting;Delahaye;Acta Mater.,2019

2. Dynamic loading of direct metal laser sintered AlSi10Mg alloy: strengthening behavior in different building directions;Hadadzadeh;Mater. Des.,2018

3. Investigation of the influences of ternary Mg addition on the solidification microstructure and mechanical properties of as-cast Al-10Si alloys;Li;Mater. Sci. Eng.,2020

4. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion;Paul;Acta Mater.,2021

5. Heat-treatment induced defect formation in α-Al matrix in Sr-modified eutectic Al–Si alloy;Liu;J. Alloys Compd.,2018

Cited by 35 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Contribution of mg dissolution on the age hardening characteristics of SiC reinforced Al-Si alloy composites;Cogent Engineering;2024-08-26

2. Effect of synergistic microalloying on the microstructural optimization of Mo/NiAl alloy with excellent mechanical properties under rapid non-equilibrium solidification;Materials Science and Engineering: A;2024-08

3. The Effect of Precipitate Phases on Mechanical Properties of Al-Cu Alloys at Elevated Temperatures;Journal of Materials Engineering and Performance;2024-07-23

4. An overview of additively manufactured metal matrix composites: preparation, performance, and challenge;International Journal of Extreme Manufacturing;2024-06-20

5. Microstructural evolution and wear resistance of composite WC10%-Ni60AA cermet built by laser directed energy deposition;Journal of Materials Research and Technology;2024-05