Optimization of key quality indicators in material extrusion 3D printing of acrylonitrile butadiene styrene: The impact of critical process control parameters on the surface roughness, dimensional accuracy, and porosity-Reference-Cited by-同舟云学术

Optimization of key quality indicators in material extrusion 3D printing of acrylonitrile butadiene styrene: The impact of critical process control parameters on the surface roughness, dimensional accuracy, and porosity

Published:2023-03 Issue: Volume:34 Page:105171
ISSN:2352-4928
Container-title:Materials Today Communications
language:en
Short-container-title:Materials Today Communications

Author:

Vidakis Nectarios^ORCID,David Constantine^ORCID,Petousis Markos^ORCID,Sagris Dimitrios^ORCID,Mountakis Nikolaos^ORCID

Publisher

Elsevier BV

Subject

Materials Chemistry,Mechanics of Materials,General Materials Science

Reference80 articles.

1. Improving the forming quality of fused filament fabrication parts by applied vibration;Jiang;Rapid Prototyp. J.,2020

2. Material and process engineering aspects to improve the quality of the bonding layer in a laser-assisted fused filament fabrication process;Bräuer;Addit. Manuf.,2021

3. J. Steuben, D.L. Van Bossuyt, C. Turner, Design for fused filament fabrication additive manufacturing, Proc. ASME Des. Eng. Tech. Conf. 4 (2015). https://doi.org/10.1115/DETC2015–46355.

4. F. Burkhardt, C.G. Schirmeister, C. Wesemann, M. Nutini, S. Pieralli, E.H. Licht, M. Metzger, F. Wenz, R. Mülhaupt, B.C. Spies Econ. Decentralized Appl. Polyolefin Filam. Addit. Fused Filam. Fabr. 2020.

5. Gaining a better understanding of the extrusion process in fused filament fabrication 3D printing: a review;Shaqour;Int. J. Adv. Manuf. Technol.,2021

Cited by 26 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The impact of process parameters and pin-to-shoulder ratio in FSW of polycarbonate: welding forces and critical quality indicators;The International Journal of Advanced Manufacturing Technology;2024-01-25

2. Study on the impact of material extrusion factors on the compressive characteristics of honeycomb lattice-structured Onyx™ composites;Materials Today Communications;2023-12

3. Novel experimental and multiscale study of additively manufactured ABS-carbon nanotubes nanocomposites;Applied Materials Today;2023-12

4. Additive Manufactured Parts Produced Using Selective Laser Sintering Technology: Comparison between Porosity of Pure and Blended Polymers;Polymers;2023-11-17

5. Printing Parameter Optimization of Additive Manufactured PLA Using Taguchi Design of Experiment;Polymers;2023-11-10