Influence of laser cladding parameters on distortion, thermal history and melt pool behaviour in multi-layer deposition of stellite 6: In-situ measurement-Reference-Cited by-同舟云学术

Influence of laser cladding parameters on distortion, thermal history and melt pool behaviour in multi-layer deposition of stellite 6: In-situ measurement

Published:2021-04 Issue: Volume:860 Page:157894
ISSN:0925-8388
Container-title:Journal of Alloys and Compounds
language:en
Short-container-title:Journal of Alloys and Compounds

Author:

Thawari Nikhil,Gullipalli Chaitanya,Chandak Aayush,Gupta T.V.K.

Funder

Department of Science and Technology, Ministry of Science and Technology, India

Publisher

Elsevier BV

Subject

Materials Chemistry,Metals and Alloys,Mechanical Engineering,Mechanics of Materials

Reference33 articles.

1. Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding;Xiang;Appl. Surf. Sci.,2020

2. Optical monitoring of high power direct diode laser cladding;Liu;Optic Laser. Technol.,2014

3. Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding;Xiang;J. Alloys Compd.,2020

4. Impact of localized surface preheating on the microstructure and crack formation in laser direct deposition of Stellite 1 on AISI 4340 steel;Fallah;Appl. Surf. Sci.,2010

5. Tribological properties of laser clad Stellite 6 coatings on steel substrates;Navas;Surf. Eng.,2006

Cited by 42 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Crack initiation and propagation within nickel-based high-temperature alloys during laser-based directed energy deposition: A review;Optics & Laser Technology;2024-12

2. A multi-sensor based online monitoring system for laser hot-wire surface cladding process;Optics & Laser Technology;2024-10

3. Laser additive manufacturing of a CoCr-based medium-entropy alloy: Impressive stacking fault-induced nanotwinning strengthening through rapid solidification;Materials Science and Engineering: A;2024-09

4. Co-based and Co/WC Laser Metal Deposition: A Comparative Study between Continuous and Pulsed Wave Laser Process Conditions;Lasers in Manufacturing and Materials Processing;2024-04-25

5. Effect of heat treatment on microstructure and wear properties of laser additively manufactured 316 L stainless steel/Co-Cr-W alloy part using directed energy deposition method;Materials Today Communications;2024-03