Microstructural evolution of belite-rich cement mortar subjected to water, carbonation, and hybrid curing regime-Reference-Cited by-同舟云学术

Microstructural evolution of belite-rich cement mortar subjected to water, carbonation, and hybrid curing regime

Published:2023-05 Issue: Volume:139 Page:105028
ISSN:0958-9465
Container-title:Cement and Concrete Composites
language:en
Short-container-title:Cement and Concrete Composites

Author:

Sharma Raju^ORCID,Pei Junjie^ORCID,Jang Jeong Gook^ORCID

Funder

National Research Foundation of Korea

Ministry of Science, ICT and Future Planning

Publisher

Elsevier BV

Subject

General Materials Science,Building and Construction

Reference86 articles.

1. Influence of alkalies on the composition of belite-rich cement clinkers and the technological properties of the resulting cements;Gies;Cement Concr. Res.,1986

2. Preparation of β-dicalcium silicate (β-C 2 S) and calcium sulfoaluminate (C4A3S‾) phases using non-traditional nano-materials;El-Sokkary;HBRC J,2012

3. Resistance of carbonation-cured belite-rich cement mortar to adverse environments: magnesium sulfate and sulfuric acid exposure;Sharma;Cem. Concr. Compos.,2022

4. Belite cements and their activation;Cuesta;Cement Concr. Res.,2021

5. Effects of the curing conditions on the carbonation curing efficiency of ordinary portland cement and a belite-rich cement mortar;Kim;Sustain. Times,2021

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Microstructural characterization of CO2-cured calcium silicate cement;Developments in the Built Environment;2024-10

2. Synergistic effects of CO2 mixing and CO2 curing in CO2 uptake capacity of Portland cement;Construction and Building Materials;2024-10

3. Effects of carbonation curing on chemical attack in cement paste incorporating liquid-crystal display glass powder as a partial binder replacement;Case Studies in Construction Materials;2024-07

4. Influence of silica fume and lime on belite-rich cement paste subjected to atmospheric and autoclave CO2 curing regime;Construction and Building Materials;2024-07

5. Utilizing CO2 to improve plastic shrinkage and mechanical properties of 3D printed mortar made with recycled fine aggregates;Construction and Building Materials;2024-06