Comparison between empirical and calculated stress intensity factors of hole edge cracks-Reference-Cited by-同舟云学术

Comparison between empirical and calculated stress intensity factors of hole edge cracks

Published:1985-01 Issue:1 Volume:22 Page:49-58
ISSN:0013-7944
Container-title:Engineering Fracture Mechanics
language:en
Short-container-title:Engineering Fracture Mechanics

Author:

Schijve J.

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Reference7 articles.

1. Digitized measurements of the shape of corner cracks at fastener holes;Grandt;Engng Fracture Mech.,1983

2. A stress intensity factor calibration for corner flaws at an open hole;Snow,1975

3. Stress-intensity factors for two symmetric corner cracks;Raju,1979

4. Interpolation between calculated stress-intensity factors of semi- and quarter-elliptical cracks;Schijve;Delft Univ. of Technol., Dept. of Aerospace Engng, Report LR-368,1983

5. Stress intensity factors for through and part-through cracks originating at fastener holes;Shah,1976

Cited by 20 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Hydrogen-Assisted Fatigue Propagation in Corner Cracks at Holes Located in Plates under Tensile Loading;Metals;2021-03-29

2. Practical Computational Fracture Mechanics for Aircraft Structural Integrity;Aircraft Sustainment and Repair;2018

3. Prediction of shape change of corner crack by fatigue crack growth circles;International Journal of Fatigue;2015-06

4. Three-Dimensional SGBEM-FEM Alternating Method for Analyzing Fatigue-Crack Growth in and the Life of Attachment Lugs;Journal of Engineering Mechanics;2015-04

5. Analytical solutions of cracks emanating from an elliptic hole in an infinite plate under tension;Chinese Journal of Mechanical Engineering;2014-09