In situ synchrotron study of sintering of gas-atomized Ti-6Al-4 V powders using concomitant micro-tomography and X-ray diffraction: Effect of particle size and interstitials on densification and phase transformation kinetics-Reference-Cited by-同舟云学术

In situ synchrotron study of sintering of gas-atomized Ti-6Al-4 V powders using concomitant micro-tomography and X-ray diffraction: Effect of particle size and interstitials on densification and phase transformation kinetics

Published:2023-03 Issue: Volume:246 Page:118723
ISSN:1359-6454
Container-title:Acta Materialia
language:en
Short-container-title:Acta Materialia

Author:

Pontoreau M.^ORCID,Coffigniez M.^ORCID,Trillaud V.^ORCID,Bourlot C. Le^ORCID,Lachambre J.^ORCID,Gremillard L.^ORCID,Perez M.,Maire E.,Adrien J.^ORCID,Steyer P.^ORCID,Douillard T.^ORCID,King A.^ORCID,Boulnat X.^ORCID

Publisher

Elsevier BV

Subject

Metals and Alloys,Polymers and Plastics,Ceramics and Composites,Electronic, Optical and Magnetic Materials

Reference65 articles.

1. Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospects;Tshephe;Heliyon,2022

2. Alloys-by-design : A low-modulus titanium alloy for additively manufactured biomedical implants;Alabort;Acta Mater.,2022

3. Fabrication of customized Ti6AI4V heterogeneous scaffolds with selective laser melting : Optimization of the architecture for orthopedic implant applications;Pei;Acta Biomater.,2021

4. An overview of residual stresses in metal powder bed fusion;Bartlett;Addit. Manuf.,2019

5. Recent developments in freeform fabrication of dense ceramics from slurry deposition;Baer,1997

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Simulation Technologies Related to the Process Design of Non-firing Solidified Ceramics;Journal of the Japan Society of Powder and Powder Metallurgy;2024-09-15

2. Investigating evolution of microstructures and mechanical properties in metal injection molding Ti6Al4V with sintering processing by quasi in-situ strategy;Powder Technology;2024-04

3. Integrated high-performance and accurate shaping technology of low-cost powder metallurgy titanium alloys: A comprehensive review;International Journal of Minerals, Metallurgy and Materials;2024-03

4. Microstructures and mechanical properties of TA1 sintered samples prepared by injection molding using water-soluble binder;Journal of Adhesion Science and Technology;2024-02-27

5. Hydrogen sintering, microstructure, and mechanical properties of Ti-10V-2Fe-3Al alloys prepared by the blended elemental method;Journal of Alloys and Compounds;2023-12