Preparation and characterization of Si3N4-based composite ceramic tool materials by microwave sintering-Reference-Cited by-同舟云学术

Preparation and characterization of Si3N4-based composite ceramic tool materials by microwave sintering

Published:2017-12 Issue:18 Volume:43 Page:16248-16257
ISSN:0272-8842
Container-title:Ceramics International
language:en
Short-container-title:Ceramics International

Author:

Xu Weiwei,Yin Zengbin,Yuan Juntang,Wang Zhenhua,Liu Yue

Funder

National Natural Science Foundation of China

Key Laboratory of High-efficiency and Clean Mechanical Manufacture at Shandong University, Ministry of Education, Open Research Program of Zhejiang Provincial Key Laboratory for Cutting Tools

Natural Science Foundation of Jiangsu Province of China

Nanjing University of Science and Technology

Publisher

Elsevier BV

Subject

Materials Chemistry,Surfaces, Coatings and Films,Process Chemistry and Technology,Ceramics and Composites,Electronic, Optical and Magnetic Materials

Reference27 articles.

1. Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures;Bocanegra-Bernal;Mater. Sci. Eng.: A,2010

2. Tribological characteristics of Si3N4-based composites in unlubricated sliding against steel ball;Liu;Mater. Sci. Eng.: A,2004

3. Thermal shock and thermal fatigue resistance of Sialon-Si3N4 graded composite ceramic materials;Zheng;Int. J. Refract. Met. Hard Mater.,2012

4. Mechanical properties and tribology of Si3N4-TiB2 ceramic composites produced by hot pressing and hot isostatic pressing;Jones;J. Eur. Ceram. Soc.,2001

5. Effect of addition of micron-sized TiC particles on mechanical properties of Si3N4 matrix composites;Ye;J. Alloy. Compd.,2017

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Synergistic Reinforcement of Si3N4 Based Ceramics Fabricated via Multiphase Strengthening under Low Temperature and Short Holding Time;Materials;2023-09-11

2. Friction and wear performances of Si₃N₄ ceramic matrix composites: A review from the perspectives of doped phase, layered structure design, and laser surface texturing;International Journal of Applied Ceramic Technology;2023-05-09

3. A Critical Review of High-Temperature Tribology and Cutting Performance of Cermet and Ceramic Tool Materials;Lubricants;2023-03-09

4. Optimized design of structural parameters of Si3N4-based ceramic tools with variable cross-section;Ceramics International;2023-02

5. Synthesis and Mechanical Properties of Silicon Nitride–Tungsten Carbide Composite Ceramics;Journal of the Japan Society of Powder and Powder Metallurgy;2022-02-15