Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23−NbC–TaC composite materials through vacuum sintering, sub-zero and heat treatments-Reference-Cited by-同舟云学术

Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23−NbC–TaC composite materials through vacuum sintering, sub-zero and heat treatments

Published:2021-05 Issue: Volume:187 Page:110132
ISSN:0042-207X
Container-title:Vacuum
language:en
Short-container-title:Vacuum

Author:

Chang Shih-Hsien^ORCID,Chang Hui-Chu,Huang Kuo-Tsung

Funder

Republic of China Ministry of Science and Technology

Publisher

Elsevier BV

Subject

Surfaces, Coatings and Films,Condensed Matter Physics,Instrumentation

Reference19 articles.

1. The electrochemical polishing behaviour of P/M high-speed steel (ASP 23) in perchloric–acetic mixed acids;Huang;Corrosion Sci.,2003

2. The surface characteristics of P/M high-speed steel (ASP 23) multi-cut with wire electrical discharge machine (WEDM);Huang;J. Mater. Process. Technol.,2003

3. ASSAB PM 23 SUPERCLEAN UDDEHOLM Vanadis 23 SUPERCLEAN, ，"title="https://www.assab.com/app/uploads/sites/133/2019/05/ASSAB_PM 23_SuperClean_EN.pdf，">https://www.assab.com/app/uploads/sites/133/2019/05/ASSAB_PM 23_SuperClean_EN.pdf，(accessed 2020-5-26).

4. Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by DC-pulsed PECVD process;Chang;Surf. Coating. Technol.,2015

5. Wear mechanisms in high speed steel reinforced with (NbC) p and (TaC) p MMCs;Gordo;Wear,2000

Cited by 13 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of Mn content on mechanical properties and corrosion resistance of Ti–8Mo-xMn alloys through the vacuum sintering process;Vacuum;2024-04

2. Microstructure, Strengthening Mechanism and Mechanical Properties of Vanadis 60-Ta0.5Nb0.5C-B4C High-speed Steel Composite via Vacuum Sintering, Sub-zero, and Heat Treatments;ISIJ International;2024-01-15

3. Effect of TaC Powder Addition on the Microstructure and Mechanical Properties of Ti–Nb–Mn Alloy via Vacuum Sintering Process;MATERIALS TRANSACTIONS;2023-12-01

4. Improvement of the Wear Resistance and Corrosion Properties of CrN Films on Oxynitriding-Treated Vanadis 23 High-Speed Steel by the DC Magnetron Sputtering Process;MATERIALS TRANSACTIONS;2023-07-01

5. Effects of the vacuum hot pressing process on the microstructures, strengthening mechanisms, and mechanical properties of Ni-35Cr-12Mo-3Nb alloys;Vacuum;2023-07