The impact of SiC, Al2O3, and B2O3 abrasive particles and temperature on wear characteristics of 18Ni (300) maraging steel in abrasive flow machining (AFM)-Reference-Cited by-同舟云学术

The impact of SiC, Al2O3, and B2O3 abrasive particles and temperature on wear characteristics of 18Ni (300) maraging steel in abrasive flow machining (AFM)

Published:2021-10 Issue:68 Volume:46 Page:33991-34001
ISSN:0360-3199
Container-title:International Journal of Hydrogen Energy
language:en
Short-container-title:International Journal of Hydrogen Energy

Author:

Seyedi Seyed Shahin,Shabgard Mohammad Reza,Mousavi Seyed Borhan,Zeinali Heris Saeed^ORCID

Publisher

Elsevier BV

Subject

Energy Engineering and Power Technology,Condensed Matter Physics,Fuel Technology,Renewable Energy, Sustainability and the Environment

Reference59 articles.

1. Influence of machining parameters on surface roughness and susceptibility to hydrogen embrittlement of austenitic stainless steels;Queiroga;Int J Hydrogen Energy,2019

2. A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy;Niaki;J Manuf Process,2017

3. The transition to a clean, dry, and energy efficient polishing process: an innovative upgrade of abrasive flow machining for simultaneous generation of micro-geometry and polishing in the tooling industry;Pusavec;J Clean Prod,2014

4. Abrasive flow machining for automatic surface finishing and capacitance technology for in-process surface and dimensional metrology;Rhoades,1990

5. Abrasive flow machining;Ionescu,2016

Cited by 57 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. High-temperature lubricity and physicochemical behaviors of synthesized Cu/TiO2/MnO2-doped GO nanocomposite in high-viscosity index synthetic biodegradable PAO oil;International Communications in Heat and Mass Transfer;2024-08

2. Insights into two-phase flow dynamics in closed-loop pulsating heat pipes utilizing Fe3O4/water: experimental visualization study;Scientific Reports;2024-07-17

3. Investigation of tribological behavior of MOFs/g-C3N4 nanocomposite for insight into effect of flake-on-sheet and ball-on-sheet nanostructure;Tribology International;2024-07

4. Heat Transfer Enhancement in Industrial Heat Exchangers Using Graphene Oxide Nanofluids;ACS Omega;2024-05-24

5. Experimental study on abrasive flow finishing of narrow inner cavity of alumina-dispersed copper absorber;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2024-04-26