A feasibility study of using a 3D-printed tumor model scintillator to verify the energy absorbed to a tumor-Reference-Cited by-同舟云学术

A feasibility study of using a 3D-printed tumor model scintillator to verify the energy absorbed to a tumor

Published:2021-09 Issue:9 Volume:53 Page:3018-3025
ISSN:1738-5733
Container-title:Nuclear Engineering and Technology
language:en
Short-container-title:Nuclear Engineering and Technology

Author:

Kim Tae Hoon^ORCID,Lee Sangmin,Kim Dong Geon,Jeong Jae Young,Yang Hye Jeong,Schaarschmidt Thomas^ORCID,Choi Sang Hyoun,Cho Gyu-Seok,Kim Yong Kyun^ORCID,Chung Hyun-Tai

Funder

Ministry of Science, ICT and Future Planning

Korea Ministry of Science and ICT

Publisher

Elsevier BV

Subject

Nuclear Energy and Engineering

Reference20 articles.

1. Modern radiosurgery equipment for treating brain metastases;Chung;Current and Future Management of Brain Metastasis,2012

2. Patient specific quality assurance for the delivery of intensity modulated radiotherapy;Agazaryan;J. Appl. Clin. Med. Phys.,2003

3. The importance of accurate treatment planning, delivery, and dose verification;Malicki;Rep. Practical Oncol. Radiother.,2012

4. Quality control of the stereotactic radiosurgery procedure with the polymer-gel dosimetry;Novotný;Radiother. Oncol.,2002

5. Exploration of the potential of liquid scintillators for real-time 3D dosimetry of intensity modulated proton beams;Beddar;Med. Phys.,2009

Cited by 3 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Manufacturing and characterization of a boron-loaded fast-cured plastic organic scintillator;Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment;2023-11

2. Enhanced characteristics of 3D-Printed plastic scintillators based on bisphenol fluorene diacrylates;Radiation Physics and Chemistry;2022-09

3. Feasibility of isodose‐shaped scintillation detectors for the measurement of gamma knife output factors;Medical Physics;2022-01-28