Simulation of plasticity-induced fatigue crack closure in part-through cracked geometries using finite element analysis-Reference-Cited by-同舟云学术

Simulation of plasticity-induced fatigue crack closure in part-through cracked geometries using finite element analysis

Published:2002-01 Issue:1 Volume:69 Page:1-11
ISSN:0013-7944
Container-title:Engineering Fracture Mechanics
language:en
Short-container-title:Engineering Fracture Mechanics

Author:

Skinner J.D,Daniewicz S.R

Publisher

Elsevier BV

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Reference20 articles.

1. McClung RC. Finite element analysis of fatigue crack closure: a historical and critical review. Fatigue'99: The Seventh International Fatigue Conference, Beijing, China; 1999

2. Three-dimensional finite-element simulation of fatigue crack growth and closure. Mechanics of fatigue crack closure;Chermahini,1988

3. Three-dimensional aspects of plasticity-induced fatigue crack closure;Chermahini;Engng Fract Mech,1989

4. Determining fatigue crack opening loads from near-crack-tip displacement measurements;Riddell,1999

5. Variation of crack-opening stresses in three-dimensions: finite thickness plate;Chermahini;Theor Appl Fract Mech,1991

Cited by 51 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. 3D characterization of closure of surface and internal fatigue cracks in nodular cast iron using Digital Volume Correlation of laboratory X-ray tomography images;International Journal of Fatigue;2024-05

2. A simple method to determine opening stress for the cracked plate considering thickness effect;Ocean Engineering;2023-01

3. Unnotched fatigue of Inconel 718 produced by laser beam-powder bed fusion at 25 and 600°C;Acta Materialia;2022-02

4. Assessment of a numerical strategy for fatigue growth and shape evolution of a corner crack from a pin-loaded hole;Engineering Fracture Mechanics;2021-09

5. A methodology for simulating plasticity induced crack closure and crack shape evolution based on elastic–plastic fracture parameters;Engineering Fracture Mechanics;2021-01