Dry machining of metal using an engraving cutter coated with a droplet-free ta-C film prepared via a T-shape filtered arc deposition-Reference-Cited by-同舟云学术

Dry machining of metal using an engraving cutter coated with a droplet-free ta-C film prepared via a T-shape filtered arc deposition

Published:2016-12 Issue: Volume:307 Page:1029-1033
ISSN:0257-8972
Container-title:Surface and Coatings Technology
language:en
Short-container-title:Surface and Coatings Technology

Author:

Fujii Yuma,Imai Takahiro,Miyamoto Yu,Ueda Naomi,Hosoo Michinari,Harigai Toru,Suda Yoshiyuki,Takikawa Hirofumi,Tanoue Hideto,Kamiya Masao,Taki Makoto,Hasegawa Yushi,Tsuji Nobuhiro,Kaneko Satoru

Publisher

Elsevier BV

Subject

Materials Chemistry,Surfaces, Coatings and Films,Surfaces and Interfaces,Condensed Matter Physics,General Chemistry

Reference29 articles.

1. Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid;Davoodi;J. Clean. Prod.,2014

2. Cutting performance of DLC coated tools in dry machining aluminum alloys;Fukui;Surf. Coat. Technol.,2004

3. The performance of hydrogenated and non-hydrogenated diamond-like carbon tool coatings during the dry drilling of 319 Al;Bhowmick;Int. J. Mach. Tools Manuf.,2008

4. Transfer of 319 Al alloy to titanium diboride and titanium nitride based (TiAlN, TiCN, TiN) coatings: effects of sliding speed, temperature and environment;Konca;Surf. Coat. Technol.,2005

5. Diamond-like amorphous carbon;Robertson;Mater. Sci. Eng. R,2002

Cited by 27 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The development of B/Cr co-doped DLC coating by FCVA deposition system and its tribological properties at 300 °C;Surface and Coatings Technology;2024-07

2. Controlling adhesion and thermal stability of tetrahedral amorphous carbon coatings with intermediate sp3C fraction;Thin Solid Films;2024-01

3. Smooth diamond-like carbon films prepared by cathodic vacuum arc deposition with large glancing angles;Diamond and Related Materials;2024-01

4. Microstructure and tribological behavior in ta-C films prepared by laser-induced filtered cathodic vacuum arc technique: Effect of charge voltage;Vacuum;2024-01

5. Clarification of the Corrosion and Frictional Behavior of Nitrogen-Doped ta-C Coating in Nitride Acid Solution;Mechanisms and Machine Science;2024