Dental implant-abutment fracture resistance and wear induced by single-unit screw-retained CAD components fabricated by four CAM methods after mechanical cycling-Reference-Cited by-同舟云学术

Dental implant-abutment fracture resistance and wear induced by single-unit screw-retained CAD components fabricated by four CAM methods after mechanical cycling

Published:2021-02 Issue: Volume: Page:
ISSN:0022-3913
Container-title:The Journal of Prosthetic Dentistry
language:en
Short-container-title:The Journal of Prosthetic Dentistry

Author:

Markarian Roberto A.,Galles Deborah P.,França Fabiana M.G.

Publisher

Elsevier BV

Subject

Oral Surgery

Reference34 articles.

1. Scanning electron microscopy analysis of the adaptation of single-unit screw-retained computer-aided design/computer-aided manufacture abutments after mechanical cycling;Markarian;Int J Oral Maxillofac Implants,2018

2. Stiffness, strength, and failure modes of implant-supported monolithic lithium disilicate crowns: influence of titanium and zirconia abutments;Joda;Int J Oral Maxillofac Implants,2015

3. Fracture strength of zirconia implant abutments on narrow diameter implants with internal and external implant abutment connections: A study on the titanium resin base concept;Sailer;Clin Oral Implants Res,2018

4. Bending moments of zirconia and titanium abutments with internal and external implant–abutment connections after aging and chewing simulation;Truninger;Clin Oral Implants Res,2012

5. Computer-aided design and computer-assisted manufacturing in prosthetic implant dentistry;Kapos;Int J Oral Maxillofac Implants,2009

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of polishing process on torque loss ratio and microgap of selective laser melting abutment: an in vitro study;BMC Oral Health;2024-09-09

2. The Fracture Resistance Comparison between Titanium and Zirconia Implant Abutments with and without Ageing: Systematic Review and Meta-Analysis;Dentistry Journal;2024-08-23

3. Influence of laser powder bed fusion parameters on microstructure and mechanical properties of Co–Cr dental alloy;Journal of Materials Research and Technology;2024-05

4. Comparison of De-Torque and Failure Load Evaluation of Selective-Laser-Sintered CoCr, CAD-CAM ZrO, and Machined Implant Abutment/Restoration;Bioengineering;2024-04-30

5. Influence of Base Plate Preheating on the Microstructure and Mechanical Properties of Co-Cr Dental Alloy Manufactured by Lpbf;2024