Le contact thermique pièce–outil lors d'une opération de forgeage à chaud: validation de l'hypothèse de résistance thermique de contact et influence de la loi de comportement de la pièce-Reference-Cited by-同舟云学术

Le contact thermique pièce–outil lors d'une opération de forgeage à chaud: validation de l'hypothèse de résistance thermique de contact et influence de la loi de comportement de la pièce

Published:2001-11 Issue:21 Volume:44 Page:4107-4117
ISSN:0017-9310
Container-title:International Journal of Heat and Mass Transfer
language:en
Short-container-title:International Journal of Heat and Mass Transfer

Author:

Bourouga B,Goizet V,Bardon J.P

Publisher

Elsevier BV

Subject

Fluid Flow and Transfer Processes,Mechanical Engineering,Condensed Matter Physics

Reference22 articles.

1. Thermal conditions in tool steels in hot upsetting and forging between dies;Beck;Stahl Eisen,1958

2. Temperature distribution in the roll-gap during hot flat rolling;Chen;J. Mater. Process. Technol.,1980

3. Heat transfer between metals in contact and its application to protection of rolls;Murata;Trans. Iron Steel Inst. Jpn.,1984

4. Workability in forging;Semiatin,1984

5. Determination of the interface heat transfer coefficient for non-isothermal bulk-forming processes;Semiatin;J. Eng. Ind.,1987

Cited by 3 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: Formation mechanisms and influence on the cutting process;Applied Thermal Engineering;2013-01

2. Thermal impedance and transient temperature due to a spot of heat on a half-space;International Journal of Thermal Sciences;2010-03

3. Modèle predictif de résistance thermique de contact dynamique adapté au cas de l’interface pièce–outil de forgeage;International Journal of Heat and Mass Transfer;2003-01