Effects of strain accumulation and annealing on interfacial microstructure and grain structure (Mg and Al3Mg2 layers) of Al/Cu/Mg multilayered composite fabricated by ARB process-Reference-Cited by-同舟云学术

Effects of strain accumulation and annealing on interfacial microstructure and grain structure (Mg and Al3Mg2 layers) of Al/Cu/Mg multilayered composite fabricated by ARB process

Published:2021-09 Issue: Volume:14 Page:392-406
ISSN:2238-7854
Container-title:Journal of Materials Research and Technology
language:en
Short-container-title:Journal of Materials Research and Technology

Author:

Tayyebi Moslem,Adhami Maryam,Karimi Armin^ORCID,Davood Rahmatabadi ^ORCID,Alizadeh Morteza,Hashemi Ramin^ORCID

Publisher

Elsevier BV

Subject

Metals and Alloys,Surfaces, Coatings and Films,Biomaterials,Ceramics and Composites

Reference43 articles.

1. Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad sheets;Macwan;Mater Sci Eng, A,2013

2. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91;Zhao;Corrosion Sci,2008

3. Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy;Liu;Mater Char,2009

4. Evolution of deformation texture in Al/Al-Mg/Al composite sheets during cold-roll cladding;Kim;Mater Sci Eng, A,2011

5. Fabrication of Al/Al 3Mg 2 composite by vacuum annealing and accumulative roll-bonding process;Liu;Mater Sci Eng, A,2012

Cited by 49 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The crucial role of accumulated strain and Cu content on the electrical, thermal, tensile, fracture, and microstructure characteristics of Al/Cu multi-layered composites subjected to SPD;Materials Today Communications;2024-12

2. High-temperature tribological behavior of the Al/Mg/Cu multilayered composite produced by the severe plastic deformation;Tribology International;2024-11

3. Characterizing of a unique Al/Cu FGMMC fabricated via the ARB-CRB process followed by annealing;Journal of Alloys and Compounds;2024-09

4. An innovative approach for overcoming challenges in the stacked extrusion forming of Mg/Al composite plates;Materials Today Communications;2024-08

5. Does VIMC-FMC work well on highly ductile bimetal joints? An investigation on mixed mode I/II fracture of AA1050/Cu bimetal weakened by U-notches;Engineering Fracture Mechanics;2024-08