Evolution of iron-rich intermetallics and its effect on the mechanical properties of Al–Cu–Mn–Fe–Si alloys after thermal exposure and high-temperature tensile testing-Reference-Cited by-同舟云学术

Evolution of iron-rich intermetallics and its effect on the mechanical properties of Al–Cu–Mn–Fe–Si alloys after thermal exposure and high-temperature tensile testing

Published:2023-03 Issue: Volume:23 Page:2527-2541
ISSN:2238-7854
Container-title:Journal of Materials Research and Technology
language:en
Short-container-title:Journal of Materials Research and Technology

Author:

Bo Lin,Xiangxiang He,Rui Xu^ORCID,Yuliang Zhao,Yemao Lu^ORCID,Huaqiang Xiao

Publisher

Elsevier BV

Subject

Metals and Alloys,Surfaces, Coatings and Films,Biomaterials,Ceramics and Composites

Reference36 articles.

1. Cavitation-resistant intergranular precipitates enhance creep performance of θ′-strengthened Al-Cu based alloys;Rakhmonov;Acta Mater,2022

2. Enhancing the tensile strength and heat resistance induced by high-density Ω phases in an Al-Cu-Mg-Ag alloy;Fan;J Mater Res Technol,2022

3. Revealing the nucleation and growth mechanisms of Fe-rich phases in Al-Cu-Fe (-Si) alloys under the influence of Al-Ti-B;Zhao;Intermetallics,2022

4. Designations and chemical composition limits for aluminum alloys in the form of castings and ingot,2006

5. Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys;Lin;J Mater Res Technol,2022

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Operando study of the dynamic evolution of multiple Fe-rich intermetallics of an Al recycled alloy in solidification by synchrotron X-ray and machine learning;Acta Materialia;2024-10

2. Trace Ca alloying enhance simultaneously strength and ductility of squeeze-cast Al-5Cu-0.5Mn-based alloys;Journal of Materials Science & Technology;2024-08

3. Preparation of a novel ultra-high strength Al–Si–Cu–Ni alloy at room/elevated temperature by squeeze casting combined with a new heat treatment process;Progress in Natural Science: Materials International;2024-08

4. The role of in-situ Al3Ti formed during solidification in improving the high-temperature properties of Al–Cu alloy;Materials Science and Engineering: A;2024-06

5. Effect of Si Addition on the Weibull Distribution of Tensile Properties of Fe-bearing Al-Cu Alloys;Silicon;2024-05-25