Experimental study on the effect of the thermal barrier coated (TBC) piston on combustion of gasoline compression ignition (GCI)-Reference-Cited by-同舟云学术

Experimental study on the effect of the thermal barrier coated (TBC) piston on combustion of gasoline compression ignition (GCI)

Published:2022-11 Issue: Volume:217 Page:119068
ISSN:1359-4311
Container-title:Applied Thermal Engineering
language:en
Short-container-title:Applied Thermal Engineering

Author:

Zheng Zunqing,Chen Peng,Zhang Fan,Yao Mingfa,Wang Hu,Liu Haifeng

Funder

National Natural Science Foundation of China

Publisher

Elsevier BV

Subject

Industrial and Manufacturing Engineering,Energy Engineering and Power Technology

Reference44 articles.

1. Johansson B. High-load partially premixed combustion in a heavy-duty diesel engine. In: Proceedings of 2005 Diesel engine emissions reduction (DEER) Conference. Chicago, Illinois, August 2005, 21–25.

2. G.T. Kalghatgi, P. Risberg, H.E. Ångström. Advantages of fuels with high resistance to auto-ignition in late-injection, low-temperature, compression ignition combustion. SAE Paper No. 2006–01-3385.

3. Gasoline compression ignition operation on a multi-cylinder heavy duty diesel engine;Mao;Fuel,2018

4. M. Sellnau F. Matthew M. Wayne et al. Development of a Gasoline Direct Injection Compression Ignition (GDCI) Engine SAE Paper No. 2014–01-1300.

5. Optimizing gasoline compression ignition engine performance and emissions: Combined effects of exhaust gas recirculation and fuel octane number;Jiang;Appl. Therm. Eng.,2019

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Numerical investigation of equivalence ratio effects on Flex-Fuel mixing controlled combustion enabled by prechamber ignition;Applied Thermal Engineering;2024-07

2. Characterization of Flex-Fuel Prechamber Enabled Mixing-Controlled Combustion With Gasoline/Ethanol Blends at High Load;Journal of Engineering for Gas Turbines and Power;2024-02-26

3. Research and analysis of a thermal optimisation design method for aluminium alloy pistons in diesel engines;Case Studies in Thermal Engineering;2023-12

4. Novel candidate of metal-based thermal barrier coatings: High-entropy alloy;Surface and Coatings Technology;2023-12

5. Influence of fuel injection parameters at low-load conditions in a partially premixed combustion (PPC) based heavy-duty optical engine;Applied Thermal Engineering;2023-09