1. M.Sadilek et. al., “Cutting forces during turning with variable depth of cut”, VSB- Technical University of Ostrava Czech Republic,20th December 2015, Elsevier
2. Aspects of using tool axis inclination angle;Sadílek;Stroj. Vestn. – J. Mech. Eng.,2011
3. Hatala, M. et al., “Simulation of Turning Process”, ISBN 978-80-8073, 2007
4. Sorin Mihai Croitoru et. Al., “FEM analysis of cutting processes”, Polytechnic University of Bucharest, 2010
5. Shravankumar C. et. al., “FEA of Orthogonal machining Using Different Tool Edge Geometries and End Relief Angles”, (IJERT) Vol. 2 Issue 10, October – 2013, ISSN: 2278-0181