Adaptability of AlTiN-based coated tools with green cutting technologies in sustainable machining of 316L stainless steel-Reference-Cited by-同舟云学术

Adaptability of AlTiN-based coated tools with green cutting technologies in sustainable machining of 316L stainless steel

Published:2020-08 Issue: Volume:148 Page:106300
ISSN:0301-679X
Container-title:Tribology International
language:en
Short-container-title:Tribology International

Author:

Lai Zhiwei,Wang Chengyong,Zheng Lijuan,Huang Wen,Yang Jianzhang,Guo Guangyu,Xiong Weiqiang

Funder

National Natural Science Foundation of China

Guangdong Science and Technology Project, China

Key program for industrial technology research in Guangzhou

Publisher

Elsevier BV

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering,Mechanics of Materials

Reference32 articles.

1. Analysis of minimum quantity lubrication (MQL) for different coating tools during turning of TC11 titanium alloy;Qin;J Mater,2016

2. Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool;An;Int J Refract Metals Hard Mater,2014

3. Cutting performance of low stress thick TiAlN PVD coatings during machining of compacted graphite cast iron (CGI);Yamamoto;J Coating,2018

4. Effect of chip sliding velocity and temperature on the wear behaviour of PVD AlCrN and AlTiN coated mixed alumina cutting tools during turning of hardened steel[J];Kumar;Surf Coating Technol,2017

5. Characterization and performance of AlTiN, AlTiCrN, TiN/TiAlN PVD coated carbide tools while turning SS 304;Kulkarni;J Adv Manuf Process,2015

Cited by 23 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Reconciliation and performance of dual-bionic microstructure on tool surface;International Journal of Mechanical Sciences;2024-11

2. Comprehensive review of advanced methods for improving the parameters of machining steels;Journal of Manufacturing Processes;2024-09

3. Composition, structure, and wear resistance of (TiZrNbMoTa)C N1- high entropy alloy carbonitride coatings prepared by reactive radio-frequency magnetron sputtering;Surface and Coatings Technology;2024-02

4. Experimental study on the cutting performance of abrasive waterjet using steel slag as the particles;Journal of Manufacturing Processes;2023-12

5. Effect of Ni Content on the Microstructure, Performance, and Mechanical Properties of High-Entropy Alloy Nitride (AlCrTiMoVNi)N Coatings Produced by Cathodic Arc Evaporation;Metallography, Microstructure, and Analysis;2023-11-10