Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics-Reference-Cited by-同舟云学术

Nonlinear hyperviscoelastic modelling of intra-ply deformation behaviour in finite element forming simulation of continuously fibre-reinforced thermoplastics

Published:2018-06 Issue: Volume:109 Page:585-596
ISSN:1359-835X
Container-title:Composites Part A: Applied Science and Manufacturing
language:en
Short-container-title:Composites Part A: Applied Science and Manufacturing

Author:

Dörr Dominik,Henning Frank,Kärger Luise

Publisher

Elsevier BV

Subject

Mechanics of Materials,Ceramics and Composites

Reference42 articles.

1. Mallick PK, editor. Materials, design and manufacturing for lightweight vehicles. Woodhead Publishing in materials. Boca Raton: CRC Press; 2010.

2. Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate;Lessard;Compos Part A: Appl Sci Manuf,2015

3. Joppich T, Doerr D, van der Meulen L, Link T, Hangs B, Henning F. Layup and process dependent wrinkling behavior of pps/cf ud tape-laminates during non-isothermal press forming into a complex component. In: AIP conference proceedings vol. 1769. p. 170011. https://doi.org/10.1063/1.4963568.

4. Development and validation of a cae chain for unidirectional fibre reinforced composite components;Kärger;Compos Struct,2015

5. Boisse P, Hamila N, Madeo A. The difficulties in modeling the mechanical behavior of textile composite reinforcements with standard continuum mechanics of cauchy. Some possible remedies. Int J Solids Struct. https://doi.org/10.1016/j.ijsolstr.2016.12.019.

Cited by 51 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Thermomechanical modeling and experimental characterization of continuous fiber-reinforced thermoplastic composites at forming temperatures;Advanced Structural Textile Composites Forming;2025

2. An industrial perspective on the present and future of thermoforming of prepregs: applications, trends, and challenges;Advanced Structural Textile Composites Forming;2025

3. Combining simulation methods and machine learning for efficient forming process development;Advanced Structural Textile Composites Forming;2025

4. A focused review of the draping process and its impact on the resin infusion in Liquid Composite Molding;Thin-Walled Structures;2024-12

5. Influence of in-plane bending behaviour on textile composite reinforcement forming;International Journal of Mechanical Sciences;2024-07