Friction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanisms-Reference-Cited by-同舟云学术

Friction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanisms

Published:2016-06 Issue: Volume:94 Page:197-208
ISSN:1359-8368
Container-title:Composites Part B: Engineering
language:en
Short-container-title:Composites Part B: Engineering

Author:

André Natália M.,Goushegir Seyed M.,dos Santos Jorge F.,Canto Leonardo B.,Amancio-Filho Sergio T.

Funder

Helmholtz Association

FAPESP – São Paulo Research Foundation

CNPq – National Council for Scientific and Technological Development

Publisher

Elsevier BV

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Reference30 articles.

1. Materials, design and manufacturing for lightweight vehicles;Mallick,2010

2. Boeing 787. From the ground up. www.boeing.com/commercial/aeromagazine/articles/qtr_4_06/article_04_2 [accessed 06.15].

3. BMW i3, the inside story: what it's made of, how it's made. SAE International. http://articles.sae.org/12056/ [accessed 06.15].

4. Audi R8 uses composites & aluminium to reduce weight by 15%. http://altairenlighten.com/2015/03/audi-r8-uses-composites-aluminium-to-reduce-weight-by-15/ [accessed 06.15].

5. Advancement in welding technology for composite-to-metallic joints;Marinelli;J Adv Mater,1994

Cited by 117 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Thermo-mechanically joined hybrids from carbon fiber-reinforced PA12 with die-cast alloy AlSi10Mg: how surface and interlayer design affect shear strength and fracture behavior;Composite Interfaces;2024-06-06

2. Achieving green and ultra-strong bonding between metals and polymers through additive manufacturing;Materials Today Communications;2024-06

3. Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite;Journal of Composite Materials;2024-05-27

4. Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion;Thin-Walled Structures;2024-04

5. Effect of Process Parameters on Joint Performance in Hot Pressure Welding of 6061 Aluminum Alloy to CF/PA66;Materials;2024-01-09