Recent Advancements in the Hole-Drilling Strain-Gage Method for Determining Residual Stresses-Reference-Cited by-同舟云学术

Recent Advancements in the Hole-Drilling Strain-Gage Method for Determining Residual Stresses

Published:2020-07-22 Issue: Volume: Page:
ISSN:
Container-title:New Challenges in Residual Stress Measurements and Evaluation
language:
Short-container-title:

Author:

Valentini Emilio,Bertelli Lorenzo,Benincasa Alessio,Gulisano Simone

Publisher

IntechOpen

Link

http://www.intechopen.com/download/pdf/70387

Reference27 articles.

1. ASTM E837-13a. Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method. West Conshohocken, PA: ASTM International, West Conshohocken; 2013. Available from: www.astm.org

2. Valentini E, Bertelli L, Benincasa A. Improvements in the hole-drilling test method for determining residual stresses in polymeric materials. Materials Performance and Characterization. 2018;7(4):446-464. DOI: 10.1520/MPC20170123 ISSN 2379-1365

3. Schajer GS, Whitehead PS. Hole-Drilling Method for Measuring Residual Stress. Vermont, USA: Morgan & Claypool; 2018. 186 pp

4. Schajer GS, Whitehead PS. Hole-drilling and ring coring. In: Schajer GS, editor. Chapter 2 in Practical Residual Stress Measurement Methods. Chichester, UK: Wiley; 2013. pp. 29-64

5. Schajer GS. Measurement of non-uniform residual stresses using the hole-drilling method. Part I—Stress calculation procedures. Journal of Engineering Materials and Technology. 1988;110:338-343

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigation of fatigue crack growth behavior and crack tip plastic zone characteristics in welded structures based on local displacement fields;Engineering Fracture Mechanics;2024-09

2. Evaluation of Residual Stresses and Distortion of Ti-5Al-2.5Sn and SS 304 Gas Tungsten Arc Welded Joints under Hybrid Thermal Tensioning Technique: Transient Thermal Tensioning and Trailing Intensive Cooling;Journal of Materials Engineering and Performance;2024-03-25

3. Cutting condition effects on microstructure and mechanical characteristics of Ni-based superalloys—a review;The International Journal of Advanced Manufacturing Technology;2024-01-05

4. Simulation of Infinite Boundaries for Axisymmetric Finite Element Models;Experimental Mechanics;2023-05-30

5. Hole-Drilling Method for Deep Residual Stress Measure in Tensile Armour Wires;Experimental Mechanics;2022-09-07