Apatite/Salt Slurry Emission Control of Post Combustion Flue Gas of Lignite and Coal in Fluidized Bed - Double Circulation Microwave Column Adsorber

Abstract

Heated Ca apatite slimes in microwave radiated salt slurries are one of the most promising technologies for advanced fuel energy storage with favorable economic potential and intrinsic properties. The development of solid pellet technology for molten salt is a key issue in the heat transport processing. The apathite phosphate, slurry salt in the slime-salt bath mixes was investigated under microwave radiation heating to result in insoluble sorbent fines dissolved in porous basket. The insoluble consists of noble metal fission products, such as Pb, Zn, Cu. In this study, there have been very few transport studies of wet steam alkali slurry (metal fines-molten alkali salt mixture). Bath ferrite/apatite particle size changed the heat conductivity to salt bath. A major reason is that the retention time in fixed film processes is longer than in solid–gas processes. This allows more time to the heat absorption for cracking to the desorbed persistent compounds. Furthermore, radiated ferrite by microwave allows a sufficient intimate contact between coal and biomass surface pores and gas atmosphere in the furnace due to more pyrolysis gas desorption. Bubbling slurry of sorbent porosity decreases while temperature decreases. There was a critical porous structure of bubbling sorbent bath which is a factor that determines to a great extent both the sorbent rate and degree of boiling it was found that, a porous slurry bath over 45% was more efficient with radiated a low amount ferrite below weight rate of 15% in microwave column.