Design, Construction and Validation of a High-Performance OATS-Reference-Cited by-同舟云学术

Design, Construction and Validation of a High-Performance OATS

Published:2021-09-10 Issue: Volume: Page:
ISSN:
Container-title:Electromagnetic Compatibility [Working Title]
language:
Short-container-title:

Author:

Meng Donglin

Abstract

The state of the art on the open-area test site (OATS) has been introduced. Key technologies on the design and validation of a high-performance OATS have been provided. Some famous OATS in the world regarding their structure, the dimensions of the ground plane (GP), the location of the control room, and performance are listed in a table. A case study is provided on NIM’s high-performance OATS. Many details are open for the first time, which show the fine design. A measurement uncertainty example has been provided in measuring the free-space antenna factor of biconical antennas. These results are based on the author’s many years of experience, with lots of valuable data and photos. It is intended for calibration laboratories, for EMC antenna users, for writing EMC standards, as well as for the assessors in EMC.

Publisher

IntechOpen

Link

http://www.intechopen.com/download/pdf/78512

Reference7 articles.

1. CISPR 16-1-6, Edition 1.1 2017-01, Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-6: Radio disturbance and immunity measuring apparatus – EMC antenna calibration

2. CISPR 16-1-5:2014+AMD1:2016 CSV, Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

3. CISPR 16-1-4, Edition 4.0 2019-01, Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements

4. Meng D. L. “A fast way to accurately calibrate tunable dipole antennas at VHF,” IEEE Transactions on Electromagnetic Compatibility 60(1): 10. 2018

5. ANSI C63.4a-2017 (Amendment to ANSI C63.4-2014), American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz