Author:
J.K. Wood Robert,D.C. Cook Alexander
Abstract
The transmission of particle-bearing liquids in pipes has motivated continuing research into erosion mechanisms and the distribution of erosion rates over wetted surfaces. This chapter covers these initiatives with particular reference to erosion-corrosion modelling within bends and straight sections of cylindrical pipes manufactured in a variety of materials and transporting a variety of liquids. Erosion-corrosion modelling techniques such as submerged slurry jets and rotating cylinder electrodes have been used to study factors influencing material degradation. Improvements in computational fluid dynamics (CFD), such as the development of a moving deforming mesh (MDM) have improved the accuracy of CFD models in predicting pipe wall erosion rates. Combined discrete phase tracking approaches such as the CFD-DPM-DEM (discrete phase-discrete element model) have helped improve computational efficiency. Wall impact erosion models are calibrated using laboratory scale tests. Validation of CFD models using full-scale test data is rare, meaning their accuracy is still largely unreported. Material testing has helped to identify the resilience of prospective pipeline materials to erosion-corrosion, while modifications to internal geometry and pipe section have shown potential to improve erosion-corrosion resistance.
Reference59 articles.
1. Burson-Thomas C, Wood R. Developments in erosion–corrosion over the past 10 years. Journal of Bio- and Tribo-Corrosion. 2017;3(2):14
2. Wang Q, Huang Q, Wang N, Wen Y, Wen Y, Ba X, et al. An experimental and numerical study of slurry erosion behavior in a horizontal elbow and elbows in series. Engineering Failure Analysis. 2021;30:105779
3. Adedeji OE. Development of Prediction Tools for Improved Wear Assessment of Pipelines and Complex Geometries. Edmonton, Alberta: University of Alberta; 2021
4. Wood R. Erosion/corrosion. In: Erosion Corrosion Fundamental. Amsterdam: Elsevier Ltd.; 2007. pp. 395-427
5. Stack M, Abdelrahman S, Jana B. Some perspectives on modelling the effect of temperature on the erosion–corrosion of Fe in aqueous conditions. Tribology International. 2010;43(12):2279-2297