GEOLOGICAL CONTROLS ON EXPLOITABLE COAL SEAM GAS DISTRIBUTION IN QUEENSLAND

Abstract

Methane is present in all coals, but a number of geological factors influence the potential economic concentration of gas. The key factors are (1) depositional environment, (2) tectonic and structural setting, (3) rank and gas generation, (4) gas content, (5) permeability, and (6) hydrogeology. Commercial coal seam gas production in Queensland has been entirely from the Permian coals of the Bowen Basin, but the Jurassic coals of the Surat and Clarence-Moreton basins are poised to deliver commercial gas volumes.Depositional environments range from fluvial to delta plain to paralic and marginal marine—coals in the Bowen Basin are laterally more continuous than those in the Surat and Clarence-Moreton basins. The tectonic and structural settings are important as they control the coal characteristics both in terms of deposition and burial history. The important coal seam gas seams were deposited in a foreland setting in the Bowen Basin and an intracratonic setting in the Surat and Clarence-Moreton basins. Both of these settings resulted in widespread coal deposition. The complex burial history of the Bowen Basin has resulted in a wide range of coal ranks and properties. Rank in the Bowen Basin coal seam gas fields varies from vitrinite reflectance of 0.55% to >1.1% Rv and from Rv 0.35-0.6% in the Surat and Clarence-Moreton basins in Queensland. High vitrinite coals provide optimal gas generation and cleat formation. The commercial gas fields and the prospective ones contain coals with >60% vitrinite.Gas generation in the Queensland basins is complex with isotopic studies indicating that biogenic gas, thermogenic gas and mixed gases are present. Biogenic processes occur at depths of up to a kilometre. Gas content is important, but lower gas contents can be economic if deliverability is good. Free gas is also present. Drilling and production techniques play an important role in making lower gas content coals viable. Since the Bowen and Surat basins are in a compressive regime, permeability becomes a defining parameter. Areas where the compression is offset by tensional forces provide the best chances for commercial coal seam gas production. Tensional setting such as anticline or structural hinges are important plays. Hydrodynamics control the production rate though water quality varies between the fields.