INVESTIGATION OF MECHANICAL PROPERTIES OF AL 7075 ALLOY SOLIDIFIED UNDER VIBRATION-Reference-Cited by-同舟云学术

INVESTIGATION OF MECHANICAL PROPERTIES OF AL 7075 ALLOY SOLIDIFIED UNDER VIBRATION

Published:2023-09-30 Issue:054 Volume: Page:212-223
ISSN:2687-6167
Container-title:Journal of Scientific Reports-A
language:
Short-container-title:

Author:

GÜLMEZ Mustafa¹^ORCID,AYGAHOĞLU Agah²^ORCID

Affiliation:

1. Kütahya Mesleki ve Teknik Anadolu Lisesi

2. Dumlupınar Üniversitesi

Abstract

Al 7075 alloy is a material with high mechanical properties and limited plastic formability at room temperature. In some special applications, it may need to be obtained by casting. In this study, it is aimed to increase the strength of the Al 7075 alloy by solidification which has a wide range of applications in sectors such as automotive, aircraft and space defense industry, under mechanical vibration applied at different frequencies after casting. Microstructure examination, compression test and hardness measurement tests are conducted to determine the changes in the mechanical properties of Al 7075 alloy in different frequencies by after solidification under mechanical vibration. Maximum hardness value is obtained at 30 Hz frequency in mechanical vibrations applied at frequencies between 10-50 Hz. This hardness value is lower than the hardness values that can be obtained by precipitation hardening, but considerably higher than the material without heat treatment.

Publisher

Kütahya Dumlupinar Üniversitesi

Reference13 articles.

1. [1] Vorozhtsov et al., (2016). Theoretical and experimental investigations of the process of vibration treatment of liquid metals containing nanoparticles. JOM, 68, 3094–3100.

2. [2] Taghavi, F.; Saghafian, H.; Kharrazi, Y.H.K. (2009). Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy. Materals & Design, 30, 1604–1611.

3. [3] Campbell, J.,(1981). Effect of vibration during solidification, International Metals Review, V:26, 71-108.

4. [4] GUO et al., (2014). Grain refinement of Al–5%Cu aluminum alloy under mechanical vibration using meltable vibrating probe, Transactions of Nonferrous Metals Society of China V:24, 2489-2496.

5. [5] Abu-Dheir et al., (2005). Silicon morphology modification in the eutectic Al-Si alloy using mechanical mold vibration. Materials Science and Engineering A. 393, 109–117.