Author:
Sherov Karibek,Ainabekova Saule,Kuanov Issa,Myrzakhmet Balgali,Bekzhanov Yeldos,Gabdyssalik Riza,Mazdubay Assylkhan,Kamarov Aman,Sherov Aibek
Abstract
This article presents the results of studying the temperature distribution in the process of thermo-frictional cutting of titanium alloy Ti-5553. The process was simulated using the Machining module of the DEFORM 3D software package based on the finite element method. It was found that when cutting off the titanium alloy Ti-5553, depending on the geometry of the circular saw, the temperature in the "disk-workpiece" contact zone reached T = 800 ÷ 1130 °C, and its propagation into the depth of the workpiece was 0.66 ÷ 0.96 mm. The optimal geometry of a circular saw for cutting off titanium alloy Ti-5553: L1 = 18 mm, L2 = 14 mm, v = 2 mm. The research was carried out within the framework of the grant № AP09562459.
Publisher
Centre for Evaluation in Education and Science (CEON/CEES)
Subject
Mechanical Engineering,General Engineering,Safety, Risk, Reliability and Quality,Transportation,Renewable Energy, Sustainability and the Environment,Civil and Structural Engineering
Reference25 articles.
1. Afonkin M.G., Zvyagin V.B. (2011) Production of workpieces in mechanical engineering. -2nd ed., add. and revised SPb.: Polytechnic. -380 p;
2. Ilyin A.A., Kolachev B.A., Polkin I.S. (2009) Titanium alloys. Composition, structure, properties. Directory. -M.: VILS-MATI.-520 p;
3. Arrazola P.J., Garay A., Iriarte L.M., Armendia M., Marya S., Le Maîtrec F. (2009) Machinability of titanium alloys (Ti6Al4V and Ti555. 3) / Arrazola P-J, et al. // Journal of Materials Processing Technology. -№209(5). -P.2223-2230. https://doi.org/10.1016/j.jmatprotec.2008.06.020;
4. Ezugwu E., Wang Z. Titanium alloys and their machinability-a review (1997) Journal of Materials Processing Technology. -№68(3). -r. 262-274. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.463.938&rep=rep1&type=pdf;
5. Dudak N., Itybaeva G., Mussina Z., Abishev K., Mukanov R. and etc. (2017) Hole Machining Based on Using an Incisive Built-Up Reamer // International Journal of Precision Engineering and Manufacturing, Volume 18, Issue 10, Pages 1425-1432. https://doi.org/10.1007/s12541-017-0170-9;
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献