Abstract
Introduction/purpose: In this paper, the aerodynamic characteristics of a special bullet were investigated at supersonic conditions. A model of a handgun saboted bullet was selected for the study. Methods: The method used in the research was computational fluid dynamic (CFD) simulation. The turbulence model k-e was used for numerical calculation. The air model was selected as an ideal gas. For air viscosity, the Sutherland model was applied. Results: The numerical simulation results show the behavior of the supersonic flow over the saboted bullet. By varying the petals opening angle and bullet velocity, their influences on the drags of the sabot and the penetrator were obtained to be used for later sabot separation study. Conclusion: The study shows that the CFD simulation approach can be implemented to analyze the aerodynamic drags on the sabot and the penetrator after the saboted bullet leaving the gun barrel. The simulation results obtained in this work are important in designing saboted light armorpiercing bullets fired from handguns.
Publisher
Centre for Evaluation in Education and Science (CEON/CEES)
Reference18 articles.
1. Abdelsalam, O.R. & Fayed, A. 2022. Tungsten carbide core 12.7x99mm AP projectiles ballistic behavior against high hardness steel armor. Journal of Physics: Conference Series, 2299, art.number:012017. Available at: https://doi.org/10.1088/1742-6596/2299/1/012017;
2. CBJ Tech. 2024. 6.5x25 CBJ APDS Tungsten core inside a discarding sabot. Cbjtech.com [online]. Available at: https://www.cbjtech.com/ammunition/6-5x25-cbj/6-5x25-cbj-apds/ [Accessed: 21 December 2023];
3. Do, V.M., Tran, T.H., Bui, X.S. & Le, D.A. 2022. Influence of spike-nosed length on aerodynamic drag of a wing-projectile model. Advances in Military Technology, 17(1), pp.33-45. Available at: https://doi.org/10.3849/aimt.01542;
4. Dolzhikov, V.I. & Nikolaev, A.V. 2015. Determination of aerodynamic characteristics of rotating aircraft in the uncontrolled flight by means of engineering analysis systems. Aerospace MAI Journal, 22(3), pp.47-53 [online]. Available at: https://vestnikmai.ru/eng/publications.php?ID=58907&eng=Y (in Russian) [Accessed: 20 January 2024];
5. Huang, Z.-g., Wessam, M.E. & Chen, Z.-h. 2014. Numerical investigation of the three-dimensional dynamic process of sabot discard. Journal of Mechanical Science and Technology, 28, pp.2637-2649. Available at: https://doi.org/10.1007/s12206-014-0620-6;