X-control charts as a means of static quality control of rope testing for export facilities in mining-Reference-Cited by-同舟云学术

X-control charts as a means of static quality control of rope testing for export facilities in mining

Published:2024 Issue:1 Volume:49 Page:31-40
ISSN:0351-0212
Container-title:Bakar
language:en
Short-container-title:Bakar

Author:

Miletić Slavica^ORCID,Trumić Biserka^ORCID,Stanković Suzana^ORCID

Abstract

Accredited Laboratory for Materials Testing within the Mining and Metallurgy Institute (MMI) Bor has a primary role in testing steel ropes for export facilities in mining. Reliable and valid test results require the possession of correct and high-quality equipment, as well as the competence of the operators for this type of test. Testing of the correctness and reliability of the equipment is carried out using our own reference material of known characteristics, confirmed in other laboratories. The paper presents the results of testing samples of own reference material on a simple twisting test device. The results obtained using the X-control chart showed that the method of twisting the samples is under control, i.e., the acceptability of the results obtained using the tested method was confirmed, which means that the correctness of the device is at the required level.

Funder

Ministry of Education, Science and Technological Development of the Republic of Serbia

Publisher

Centre for Evaluation in Education and Science (CEON/CEES)

Link

https://scindeks-clanci.ceon.rs/data/pdf/0351-0212/2024/0351-02122401031M.pdf

Reference9 articles.

1. I. Vitez, M. Oruc, R. Sunulahpašić, Ispitivanje metalnih materijalamehanička i tehnološka ispitivanja, Graforad, Zenica, BiH, 2006, str 48;

2. A. Ž. Drenovac, B. Ž. Drenovac, D. M. Drenovac, Kontrolne karte kao sredstvo statičke kontrole kvaliteta, Vojno tehnički glasnik, 1 (2013) 101-122, https://doi.org/10.5937/vojtehg61-2292;

3. M. Đukić, S. Vasiljević, Z. Sovrlić, D. Adamović, Verifikacija i validacija analitičkih metoda u skladu sa standardom ISO/IEC 17025, Bakar, Vol. 48, 2 (2023) 25-34, https://doi.org/10.5937/bakar2302025D;

4. V. Ivušić, M. Franz, Materijali I, Deo Mehanička svojstva materijala, autorizovana predavanja, Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Zagreb, 1993/1994;

5. D. Ćorić, Ž. Alar, Odabrana poglavlja iz mehaničkih svojstava materijala, predavanja, Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Zagreb, 2016/2017;