Shear design of reinforced concrete elements with circular cross section according to Eurocode 2-Reference-Cited by-同舟云学术

Shear design of reinforced concrete elements with circular cross section according to Eurocode 2

Published:2023 Issue:1 Volume:55 Page:90-111
ISSN:0352-2733
Container-title:Gradjevinski kalendar
language:en
Short-container-title:Građ kalendar

Author:

Pecić Nenad^ORCID,Mašović Snežana^ORCID,Stošić Saša^ORCID,Mašović Dragan

Abstract

Eurocode 2 does not provide explicit guidance for the shear design of elements with circular cross-section - the terms in the provisions are intended for elements with concentrated tensile reinforcement, such as beams subjected to bending. The most common elements with circular cross-section are columns and piles, which typically have uniformly distributed reinforcement around the circumference and significant axial force. It is necessary to adjust the relevant inputs in order to formulate procedures of reasonable complexity, which are suitable for practical application. The paper presents the application of the Eurocode's 2 model for shear design on circular cross-section elements. Simple instructions are given for practical calculations that are on the safe side, covering all aspects of shear design: shear resistance of concrete, shear resistance of reinforcement, maximum shear resistance and calculation of additional tensile reinforcement. The procedures are illustrated with a numerical example in accordance with the national document SRPS EN 1992-1-1/NA.

Publisher

Centre for Evaluation in Education and Science (CEON/CEES)

Link

https://scindeks-clanci.ceon.rs/data/pdf/0352-2733/2023/0352-27332301090P.pdf

Reference12 articles.

1. SRPS EN 1992-1-1: Evrokod 2 -Projektovanje betonskih konstrukcija -Deo 1-1: Opšta pravila i pravila za zgrade, Institut za standardizaciju Srbije, 2015, 232 str.;

2. Pecić N., et al. (2021). Shear provisions for concrete structures according to en 1992-1-1: open issues, Conference Proceedings 8-th International Conference Contemporary Achievement in Civil Engineering, Subotica, Serbia, p.p. 173-183, DOI: 10.14415/konferencijaGFS2021.15;

3. Orr J. J. et al. (2010). Shear design of circular concrete sections using the Eurocode 2 truss model. The Structural Engineer 88 (23), p.p 26-32, December 2010, DOI:10.17863/CAM.17020;

4. Mark P. et al. Sonderaspekte zur Schubbemessung nach DIN 1045-1 und EC 2, BetonKalender 2008, 227-273.;

5. DIN 1045-1: Tragwerke aus Beton, Stahlbeton und Spannbeton -Teil 1: Bemessung und Konstruktion. 2008, p.p. 183.;