Force Characteristics and Mechanical Topology Optimization of Hydraulic Machine Structures: Statics and Dynamics

Abstract

In this paper, the design requirements of the hydraulic testing machine are based on the actual force conditions. Static and dynamic performance analyses of the stressed components of the hydraulic machine are carried out and the mechanical topology is optimized. Combining the static and dynamic objective functions of the structure, a fast variable density topology method is proposed, thus improving the optimization efficiency. After setting the positions of the optimized and non-optimized regions. It can be found that the optimized mechanical performance is more superior as the number of iterations increases. The results show that the stress in the strut is 175.75 MPa and the maximum stress in the upper beam structure is 43.708 MPa. The first sixth order frequency is much higher than the operating frequency of 3 Hz. The final results of the mechanical topology optimization analysis show. The optimized structure of the upper, middle and lower crossbeams resulted in a mass reduction of 38%, 36% and 5.57%. The maximum stresses in the upper and middle crossbeams were reduced by 10.33%, 8.3% and 51.8%, respectively. The deformation was reduced by 6.14% at the fastest time; the inherent frequency of the first 3 orders was increased to achieve light weight. The overall mechanical properties became better after optimization, and the dynamic and static stability of the frame was improved. Translated with www.DeepL.com/Translator (free version)